|
|
Jaguar XK8 Plug ReplacementRemove the access cover for the plug coils and to the plugs.
When you attempt to remove the cover you may come across a bolt that will turn but not come loose. This is due to the nut coming loose and you may need to apply a little pressure from behind to get it out.
I was not so lucky
After removing the coil pack check it to see if you have oil in the cylinder with the plug. Because of the oil filler is on that side be sure the oil in the cylinder was not caused by oil overfill leaking into that area before you assume that you have a leaking valve cover gasket.
I used BOSCH Platinum 4501.
On this side you will need to remove the TB intake tube. When you do this do not bend or force the pipe. You should check it for any leaks or cracks.
When I reinstall any and all electrical connections I use CRC contact cleaner and CRC Di-Electrical grease. Do not over use the grease.
|
|
|