Hard Reset Procedure

You remove the “-“ cable from the battery then take that cable and place it on the “+” cable and hold it in place for 30 seconds then place the “-“ cable back on the battery.

If you are not comfortable with that;

You can remove the “-“ cable from your battery then turn the key on in the run position turn the lights and the horn for 30 seconds then turn the lights and the ignition key off and reinstall the “-“ cable.

When you do this your car is reset to ground “0” meaning you will lose the window memory so you will need to reset both windows, you will also lose all your radio presets and the possibility that your radio may need the security code. If you need the code to make the radio work just call Jaguar and they will give it to you.

Link to  Jaguar XK8/R window Reset




 

Follow Gus_jagrepair on Twitter

You should follow JagRepair.com on Twitter

See us on Facebook

 

 

Please support JagRepair.com

 

 

Home | Contact Us!

JagRepair.com is designed as an information resource and is not a forum.

All information provided is believed to be correct and it is given in good faith. Users of this information will use good judgment and comply with all the safety rules that apply to operating tools and equipment. JagRepair.com cannot be held responsible if any of the information provided is not correct or does not work for you. Owner of the vehicle accepts responsibility with any and all applications they choose to use.

JAGUAR and its logo are the registered trademarks of Jaguar Land Rover Limited. Jaguar Land Rover Limited is not affiliated with JagRepair.com.

JagRepair.com © 2012 - 2017 by Gus Glikas. All rights reserved.
The JagRepair logos and all proprietary artwork, photos and content are the property of Gus Glikas and may not be reproduced or distributed without expressed written permission.